Visualization of S5R2 / S5R3 difference

archae86
archae86
Joined: 6 Dec 05
Posts: 3145
Credit: 7024904931
RAC: 1811824

RE: RE: ....

Message 74764 in response to message 74763

Quote:
Quote:
.... Fortunately, the most recent BOINC versions have fixed this (5.10.20 is OK, maybe one or two releases before that).

I remember the problem only too well, but I thought they fixed it somewhere in the middle of the BOINC v5.8.xx range - v5.8.16 seemed to be all right, from what I remember.


Quite possibly I was in error, but I thought I saw this as an improvement between 5.10.13 and 5.10.20 and posted thanks, to which John McLeod VII responded with a PM thanking me for the comment. Perhaps he was too polite to point out that I was many versions late.

archae86
archae86
Joined: 6 Dec 05
Posts: 3145
Credit: 7024904931
RAC: 1811824

RE: Alternatively, running

Message 74765 in response to message 74759

Quote:
Alternatively, running with networking disabled should do it


Now here is an oddity. I tried suspending network activity remotely using BOINCView. The message log shows:
Suspending network activity - user request
but about sixteen seconds later, it shows:
Resuming network activity.

I tried doing it from the Activity menu of boinmgr--no joy.
Also tried it from boingmgr using Advanced|Preferences|Network Usage|Network usage allowed every day between hours of:

Humm... I wonder if it is a feature of 5.10.20 that you can't actually turn network activity off, or if I have something funny set somewhere?

Some versions ago, I did this routinely for testing purposes, so I used to know how.

Richard Haselgrove
Richard Haselgrove
Joined: 10 Dec 05
Posts: 2139
Credit: 2753038467
RAC: 1370902

RE: RE: Alternatively,

Message 74766 in response to message 74765

Quote:
Quote:
Alternatively, running with networking disabled should do it

Now here is an oddity. I tried suspending network activity remotely using BOINCView. The message log shows:
Suspending network activity - user request
but about sixteen seconds later, it shows:
Resuming network activity.

I tried doing it from the Activity menu of boinmgr--no joy.
Also tried it from boingmgr using Advanced|Preferences|Network Usage|Network usage allowed every day between hours of:

Humm... I wonder if it is a feature of 5.10.20 that you can't actually turn network activity off, or if I have something funny set somewhere?

Some versions ago, I did this routinely for testing purposes, so I used to know how.


Could it be a version incompatibility? Some time ago, I was running Trux's 5.3.12 client on some machines, and reasonably modern Berkeley clients on others. BOINCView would control the networking on one, but not the other. If I changed BV version, roles were reversed. I suspect the BOINC RPC interface is a movable feast.

Anyway, I haven't had any problems since standardising on BV 1.4.2 and CC 5.10.13

Yin Gang
Yin Gang
Joined: 23 Feb 05
Posts: 52
Credit: 120187750
RAC: 0

Hi Bikeman, Would you

Hi Bikeman,

Would you please explain what the last two columns in the result file mean?

Best Regards,
Yin Gang

Welcome To Team China!

Bikeman (Heinz-Bernd Eggenstein)
Bikeman (Heinz-...
Moderator
Joined: 28 Aug 06
Posts: 3522
Credit: 686219439
RAC: 552581

Hi! AFAIK, column #5 is a

Hi!

AFAIK, column #5 is a measure of how well the detector data matches the hypothesis that there is a continuous gravitational wave source at sky coordinates given by (column #2, column #3) (RA, Dec in radians) with a frequency of (col#1) Hz and a change in frequency over time given by (column #4) (in 1/sec^2, I guess).

The higher the value in column 5, the better the candidate.

CU
Bikeman

Yin Gang
Yin Gang
Joined: 23 Feb 05
Posts: 52
Credit: 120187750
RAC: 0

Hi Bikeman, Thanks for

Message 74769 in response to message 74768

Hi Bikeman,

Thanks for your quick response:)

Best Regards,
Yin Gang

Welcome To Team China!

hoarfrost
hoarfrost
Joined: 9 Feb 05
Posts: 207
Credit: 92514403
RAC: 110940

What candidates may be the

What candidates may be the present GW-pulsars? With col5 > 7? 6?

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4267
Credit: 244933581
RAC: 16281

RE: What candidates may be

Message 74771 in response to message 74770

Quote:
What candidates may be the present GW-pulsars? With col5 > 7? 6?


It's impossible to tell from a single value. The last column just describes a significance value, not e.g. the strength of a GW. Furthermore candidates returned from the HierarchicalSearch code only describe a region in the sky, not a single pulsar. In any case needs further analysis of the returned results (not only one btw.) to tell.

BM

BM

Mats Nilsson
Mats Nilsson
Joined: 10 Dec 05
Posts: 94
Credit: 15011147
RAC: 0

RE: Hi! 7) start TOPCAT

Message 74772 in response to message 74755

Quote:

Hi!

7) start TOPCAT

H-BE

A little question, No java expert so how can I do this, can´t find a file to start topcat with.

Bikeman (Heinz-Bernd Eggenstein)
Bikeman (Heinz-...
Moderator
Joined: 28 Aug 06
Posts: 3522
Credit: 686219439
RAC: 552581

RE: RE: Hi! 7) start

Message 74773 in response to message 74772

Quote:
Quote:

Hi!

7) start TOPCAT

H-BE

A little question, No java expert so how can I do this, can´t find a file to start topcat with.

Hi!

But you downloaded the *.jar file and you have java 1.5 or better installed? Then

java -jar {name-of-jar-file}

will start an application that's packaged as a single jar.

Have fun
H-BE

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.